Truck-mounted extraction, structural drying, and mold prevention statewide

Emergency Water Damage Extraction in Florida, 24/7

Emergency Water Damage Extraction in Florida starts with a phone call and ends with a dry, verified structure. We pull standing water from flooded basements, storm-soaked condos, and burst-pipe crawlspaces across the state, then dry the framing, drywall, and subfloor before mold gets a foothold. One crew handles extraction, moisture mapping, and documentation for your insurance claim. We answer 24/7, including holidays.

↗
Fast online booking

Request service today

Tell us what is happening. Our local team will confirm your visit shortly.

No spam. No obligation. Just practical help.
Thanks — we'll call shortly to confirm your visit.
Emergency Water Damage Extraction
Careful work. Honest options.
About this service

What Emergency Water Damage Extraction in Florida Involves

Emergency Water Damage Extraction in Florida is the emergency removal of standing water from a structure using truck-mounted water extractors, portable extraction units, and water pumps, followed by structural drying to prevent mold and warping. When a supply line bursts at 2 a.m. or a storm pushes water through a sliding door, every hour of standing water raises the odds of mold growth, cupped hardwood, and a denied insurance claim. We extract the water, map the moisture with a moisture meter and thermal imaging camera, and set drying equipment the same day.

Florida homes face water intrusion from burst pipes, roof leaks, toilet overflows, sewage backups, appliance leaks, and storm surge flooding. In coastal and low-lying neighborhoods, a slab leak or hurricane water intrusion can soak a home in minutes. Our crews carry Florida emergency water removal equipment sized for both a single bathroom and a 40,000-square-foot commercial floor. If you are searching for 24/7 emergency water extraction near me Florida, we are the crew that shows up with the truck, the hose, and the drying plan.

  • ✓ Same-Day Water Removal
  • ✓ Mold Prevention Built In
  • ✓ Insurance Documentation
  • ✓ Licensed and Insured Crews
What's included

What Is Included in Emergency Water Damage Extraction

Our standard extraction and drying package covers the emergency response, the water removal, the drying equipment, and the documentation. We tell you upfront what is included so there are no surprises on the invoice. Add-on services like reconstruction or mold remediation are quoted separately if needed.

✓

Emergency Water Extraction

Truck-mounted and portable extraction of standing water from floors, carpets, and low areas. Includes water pump use for basements and deep standing water. Most residential jobs are extracted in two to four hours.

✓

Moisture Mapping and Documentation

Room-by-room moisture readings with a moisture meter, thermal imaging camera, and infrared thermometer. We photograph affected materials and log readings daily so your insurance claim has a complete record.

✓

Structural Drying Setup

Air movers, dehumidifiers, floor drying mats, and wall cavity drying vents placed to dry the structure. Desiccant dehumidifiers for dense materials. Equipment runs three to five days with daily monitoring.

✓

Antimicrobial Treatment

Application of antimicrobial solution and disinfectant to affected framing, drywall edges, and subfloor. This slows mold growth while the structure dries. Included on every job, not an upsell.

✓

Final Moisture Verification

Final readings on every affected area to confirm the structure hit dry standard. We remove equipment, provide a drying report, and leave you with documentation for your records and your adjuster.

How it works

What to Expect From Our Water Extraction Process

01

Emergency Call

You call, we ask what happened, where the water is, and whether the source is stopped. We dispatch the nearest crew and give you an arrival window. If the water is still running, we walk you through shutting off the main valve before we arrive.

02

Inspection and Mapping

On arrival, we inspect the source, then map moisture with a moisture meter, thermal imaging camera, and borescope camera. We check wall cavities, ceilings, and subfloors because water travels. This inspection takes 20 to 40 minutes and tells us exactly where to extract.

03

Water Extraction

We run truck-mounted water extractors for large volumes and portable extraction units for tight spaces like closets and under cabinets. A water pump handles standing water in flooded basements. Most residential extractions take two to four hours.

04

Structural Drying

We set air movers, dehumidifiers, and floor drying mats, and install wall cavity drying vents where needed. Desiccant dehumidifiers handle dense materials. Equipment runs 3 to 5 days, and we monitor moisture readings daily until the structure hits dry standard.

05

Final Verification

We re-check every affected area with the moisture meter and infrared thermometer, remove equipment, and provide a drying report with photos and readings. If any material still reads wet, we keep drying at no extra equipment charge.

Tools & methods

Tools and Methods We Use

Purpose-built equipment, used by trained technicians — so the job is done accurately the first time.

Truck-mounted water extractor

Pulls hundreds of gallons per minute from flooded floors. The fastest way to remove standing water from a large area.

Portable extraction unit

Reaches tight spaces like closets, under cabinets, and upper floors where the truck cannot park.

Thermal imaging camera

Finds hidden moisture behind walls and above ceilings without opening every surface.

Borescope camera

Inspects inside wall cavities and under floors to confirm moisture and check for mold growth.

Desiccant dehumidifier

Dries dense materials and low-permeability spaces where standard dehumidifiers fall short.

HEPA air scrubber

Filters airborne mold spores and dust during extraction and drying to protect indoor air quality.

Floor drying mats

Dries hardwood and engineered flooring from the surface down without removing the boards.

Real results

Before and after.

Burst Pipe in a Jacksonville Ranch Home

Before

A supply line burst under the kitchen sink overnight and ran for six hours. Water spread across 600 square feet of hardwood and soaked the baseboards and lower drywall. The homeowner called us at 6 a.m.

After

We extracted the standing water in three hours, pulled the wet baseboards, and dried the hardwood with floor drying mats. Moisture readings hit dry standard in four days. The hardwood was saved, and no mold grew.

Storm Surge in a Bal Harbour Condo

Before

A tropical system pushed water through sliding glass doors and soaked 400 square feet of carpet and the lower wall cavities. The condo sat wet for 18 hours before the owner called.

After

We extracted the water, removed the wet carpet pad, and dried the wall cavities with vents and air movers. The structure hit dry standard in five days. The adjuster approved the claim based on our documentation.

Sewage Backup in a Lakeland Rental Unit

Before

A main line backup pushed sewage into a ground-floor bathroom and hallway. About 200 square feet were contaminated, including drywall and vinyl flooring. The tenant called the property manager immediately.

After

We extracted the water in PPE, removed the contaminated drywall and flooring, treated the area with antimicrobial solution, and dried the structure in four days. The unit was re-occupied by Friday.

Problems we solve

Florida Water Damage Problems We Solve

Water damage in Florida is not one problem. It is storm surge, slab leaks, aging plumbing, and humidity that never lets materials dry on their own. Here are the most common issues we solve for Florida homeowners and property managers.

Ask a pro →
01

Standing water after a storm or burst pipe

We extract standing water with truck-mounted extractors and water pumps, often within hours of your call. Then we map moisture and set drying equipment so the structure dries before mold can colonize.

↗
02

Hidden moisture in walls and ceilings

We use thermal imaging cameras and borescope cameras to find moisture behind walls and above ceilings. Then we extract, open cavities where needed, and dry with wall cavity drying vents.

↗
03

Sewage backup contamination

We treat sewage backups as contaminated losses. Full PPE, removal of affected materials, antimicrobial treatment, and disinfection before drying. We document the loss properly for your claim.

↗
04

Insurance claim denials

We photograph affected materials, log moisture readings daily, and build an Xactimate-ready scope. Your adjuster gets the drying log and equipment inventory needed to approve the claim.

↗
Proof you can check

Licensed, Certified, and Insured

✓
IICRC WRT (Water Restoration Technician)Institute of Inspection, Cleaning and Restoration Certification
✓
IICRC ASD (Applied Structural Drying)Institute of Inspection, Cleaning and Restoration Certification
✓
IICRC AMRT (Applied Microbial Remediation Technician)Institute of Inspection, Cleaning and Restoration Certification
✓
Florida Mold-Related Services License (MRSA)Florida Department of Business and Professional Regulation
✓
EPA Lead-Safe CertificationU.S. Environmental Protection Agency
Customer reviews

What Florida Customers Say

★★★★★
“A supply line burst under our kitchen sink at 11 p.m. We called and a crew was at the house in about 75 minutes. They pulled the water, set air movers and a dehumidifier, and checked the cabinets with a moisture meter. Four days later everything was dry and the insurance paperwork was already submitted. No mold, no drama.”
MT

Marcus T.Homeowner, Jacksonville

✓ Verified
★★★★★
“We manage 40 rental units and a sewage backup hit one of them on a Sunday. The crew showed up in PPE, extracted the water, treated the area with antimicrobial, and removed the contaminated drywall. They had the unit dry in four days and the tenant back in by Friday. That is the response we need.”
DK

Dwayne K.Property Manager, Lakeland

✓ Verified
Good questions

Frequently Asked Questions

+18555742638 →

It is the emergency removal of standing water from a Florida structure using truck-mounted extractors, pumps, and portable units, followed by structural drying. It is not just vacuuming water. It includes moisture mapping, antimicrobial treatment, equipment placement, and daily monitoring until the building hits dry standard. Most jobs take two to five days from extraction to final verification.

Typical 2026 pricing in Florida runs $1,200 to $4,500 for a residential extraction and drying job, depending on square footage, water category, and how long the water sat. Clean-water jobs with fast response cost less. Sewage backups and storm surge flooding cost more because of contamination and material removal. Most insurance policies cover the work.

We typically arrive within 60 to 90 minutes in metro areas and start extraction within 15 minutes of arrival. A standard flooded living room takes two to four hours to extract. Larger losses, like a flooded basement or a commercial floor, can take six to eight hours. Every hour you wait increases mold risk and repair cost.

Yes. We answer calls 24 hours a day, seven days a week, including holidays and during hurricane season. Night and weekend dispatch is the same number and the same response standard. If your water heater lets go at 2 a.m., call and we will send the nearest crew.

Where we deliver this service

Cities We Serve for Emergency Water Damage Extraction in Florida

We deliver Florida emergency water removal across the entire state, from the Panhandle to the Keys. Our crews are positioned in major metros so we can reach most homes and businesses within 60 to 90 minutes. Whether you are in a coastal condo, an inland ranch, or a commercial building, we bring the same equipment, the same certifications, and the same drying standard.

JacksonvilleWe handle burst-pipe extraction and wall cavity drying in Jacksonville's older homes, where galvanized and cast iron plumbing fails at joints. Crews reach most neighborhoods within 90 minutes.View area →Pembroke PinesPembroke Pines homes deal with appliance leaks and storm intrusion. We extract water fast and dry the structure before mold can take hold in the South Florida humidity.View area →LakelandLakeland's mix of older ranches and newer construction means we see both slab leaks and PEX fitting failures. We extract, dry, and document for your insurance claim.View area →LargoLargo's coastal proximity means storm surge and wind-driven rain. We handle hurricane water intrusion with truck-mounted extraction and full structural drying.View area →SarasotaSarasota condos and homes near the water face storm surge and humidity-driven mold. We extract the water, dry the wall cavities, and verify moisture before we leave.View area →Altamonte SpringsAltamonte Springs homes often have second-floor appliance leaks that soak ceilings below. We use thermal imaging to find the wet zones and dry both floors.View area →Winter GardenWinter Garden's newer construction uses PEX supply lines that can fail without warning. We extract the water and dry the flooring fast to save hardwood and laminate.View area →East LakeEast Lake homes deal with slab leaks and toilet overflows. We extract the water, check the subfloor with moisture meters, and dry until readings hit dry standard.View area →Ferry PassFerry Pass, near Pensacola, sees heavy rain and storm intrusion. We respond with truck-mounted extraction and drying equipment sized for the job.View area →PrincetonPrinceton's agricultural surroundings and older housing stock mean aging plumbing. We handle burst-pipe extraction and wall cavity drying for these homes.View area →UniversityUniversity-area rentals and student housing see frequent toilet overflows and appliance leaks. We extract, dry, and document quickly so units get back online.View area →ZephyrhillsZephyrhills homes deal with slab leaks and well-water system failures. We extract the water, dry the structure, and check for hidden moisture under tile.View area →Cutler BayCutler Bay's coastal location means storm surge risk. We handle hurricane water intrusion with extraction, antimicrobial treatment, and structural drying.View area →Miami LakesMiami Lakes slab-on-grade homes let water travel under tile. We use thermal imaging to find wet zones, extract the water, and dry the slab and flooring.View area →GouldsGoulds homes face heavy rain and aging plumbing. We respond with truck-mounted extraction and dry the structure to prevent mold growth in the South Florida humidity.View area →
Ready when you are

Call Now for Emergency Water Damage Extraction in Florida

Water damage gets worse every hour. Call us and we will dispatch the nearest crew, extract the water, and start drying the same day. We answer 24/7, we bill insurance directly when your policy allows, and we stand behind the drying results in writing.

Get Emergency Help +18555742638 →
Request an appointment

Contact Florida Aero Dry Restoration

Call us any time, day or night. We answer 24/7 and dispatch crews across Florida with truck-mounted extractors and drying equipment. Most addresses see a tech within the hour. If you prefer email, send photos of the damage and we will get back to you fast with next steps.

Call anytime+18555742638Email the office[email protected]
Office hoursOpen 24 hours · 7 days a week
Request received — our team will be in touch shortly.
Tap to call+18555742638